Learn to diagnose the common hoverboard charging problems and the fixes with detailed explanations.
Hoverboards are one of the coolest gadgets of the 20th century. But charging problems with hoverboards are a very common thing for the users and it can get costly.
Most common charging issues can be solved without spending a lot of money. We are going to talk about a few of these problems and how you can fix them. That way you’ll be able to diagnose the problem with your hoverboard and hopefully repair it on your own.
Without any further ado, let’s check out the common charging problems in a hoverboard and the fixes for them.
How do you know if your hoverboard is charging?
If you don’t know how hoverboards work, knowing if it’s charging can be a tricky thing. That’s because, for most hoverboards, you can’t find any illumination saying that it’s on charging mode. That’s why you need to use other methods to find out whether it’s charging or not.
Go over the following steps as it’s the best way to know whether your hoverboard is charging or not.
- Turn on your hoverboard.
- Plug the charging cable into the hoverboard.
- Once the charging cable is connected, the light should start to blink.
- Let it sit and charge for a few minutes.
- Remove the charging cable and see if the hoverboard has retained some power on the battery.
- If there’s power in the battery, then there’s no issue with the changing.
- But if the battery indicator immediately goes to red, that means your hoverboard’s battery was not charged.
That’s the best way to tell if your hoverboard is charging or if there’s an issue with the whole process. However, if you don’t see the lights pop out, you can run another test as well.
You probably notice that when you charge your phone for a long time, your charger brick gets a little hot. That principle can be a great way to check your hoverboard charging status as well. You simply need to touch the body of the power adapter that’s attached to the charger and check its temperature.
If you feel that the adapter is completely cold, then you know there was no power passing through, meaning your hoverboard was not charged. If it’s warm but your hoverboard still didn’t retain any charge, then there are definitely some other issues.
Hoverboard Charging Problems
There are a lot of things that can cause your hoverboard charging problem. But there are a few common issues that most users face. Let’s talk about 3 of the main problems that can mess up the charging mechanism of your hoverboard.
- Broken charger
A defective charger is a common problem that can cause your hoverboard not to charge. You can check whether your charger is working or not following our in-depth guide in the later segments in this article.
- Defective charging port
A faulty charger port can also cause your hoverboard not to charge properly. Sometimes the charging port is just loose. That means your hoverboard charges well sometimes and the other time it doesn’t charge at all.
However, if the port is just defective, then it’s not going to charge your hoverboard at all. You should definitely get it fixed. Otherwise, it can damage other parts of your hoverboard as well.
- Damaged battery
One of the most common issues that cause hoverboard charging issues is a damaged battery. If there is no battery to store the power, then it’s going to do you no good no matter how long you charge it.
Sometimes the performance and battery life of your hoverboard can draw significantly telling you that you might get yourself prepared for a battery replacement.
How to Fix the Hoverboard Charging Problem
We went over 3 of the main issues that can cause charging problems in your hoverboard. Now that you can diagnose your hoverboard and tell what’s wrong with it, it’s going to be much easier for you to fix it. Let’s check out what you can do for each case down below.
- Defective charger
If you have a defective charger, you must buy a new charger. You should never compromise with the quality of your charger as well. A cheap charger can damage the battery and kill its longevity.
So, you should get a decent quality charger for your hoverboard, and it’s going to help maintain the battery life, which is pretty important. Don’t try to fix any broker charger. That might damage the battery.
- Damaged charging port
If your hoverboard is not charging because of the damaged charging port, then you can fix it by yourself. We covered how you can fix it with an in-depth tutorial in the next segments. That’ll help you do it and save money as well. So, if that’s your issue, then feel free to skip to the next segment.
- Dead battery
In most cases, people run into this problem. Their hoverboard gets old, and the battery life gets drastically down. In this case, you need to replace the battery and get a new one.
Sometimes the damaged battery can hold a little bit of power, which can give you a few minute rides every time you charge your hoverboard. But that’s not the best experience, and you need to get a new battery charger for your hoverboard.
Note: You should always get a good hoverboard like Flying Ant to get rid of the problem of charging.
How do you know if your hoverboard charger is bad?
There are many ways to check if your hoverboard charger is not working. The first method is to check the temperature of the charger. Plug the charger in a wall socket and don’t attach it to the hoverboard.
The temperature should stay neutral and it should not get hot if not attached to the hoverboard. But if you feel like it got hot, then the charger is definitely defective. A charger can get hot only when it’s actively charging the hoverboard.
You can also take this charger and check in on other devices. If your friend has a hoverboard that should work out perfectly.
How to fix hoverboard charger port
You are mostly going to face two issues with the charger ports in your hoverboard. In one scenario, the charger port is going to be loose, and you can simply tighten it to fix the whole thing. For the other case, you’ll need to replace the charger port completely.
Down below, let’s go over the exact method for fixing both problems.
Tightening the charger port
If you have a loose charger port, you might not need to replace it just yet. Just go along with the following steps, and hopefully, you’ll be able to fix it all by yourself.
- Take the battery out.
- Make sure to press the power button as the capacitors might still be active.
- Now, you need to find the wire of the charging port that’s attached to the motherboard.
- Once you find it, unclip it.
- After that, use a small tool like needle-nose pliers to tighten the nuts around the whole thing.
- If that’s not working, you can always try some hot glue. But don’t use it unless you absolutely need to.
- Put everything back together and it should work perfectly.
Installing a new charger port
In some cases, you are going to need to change the charger port of your hoverboard. Make sure to follow the steps properly that are provided down below.
- First, open the body of your hoverboard.
- Take out the battery.
- Press the power button to make sure the capacitors are discharged.
- If there’s any glue attached to the port, take it out using needle-nose pliers.
- Find the wire that connects the motherboard and the charging port and unclip it.
- Now, loosen up the screws and gently take out the port.
- Take a new charging port and place it exactly there.
- Tighten the screws and use glue if you want to fix it in place.
- Rewire the whole thing and put it all together.
Why is my hoverboard blinking yellow while charging?
If your hoverboard is blinking yellow while charging that means you need to replace the battery as soon as possible. Yellow blinking lights indicate that your hoverboard’s battery is not doing so well. So, you can expect a significant drop in performance and reliability from your hoverboard.
The battery damage will affect the speed and longevity greatly. In that case, you must change the battery, and unfortunately, there’s no way around it.
Wrap Up
We covered a lot about hoverboard charging problems and how you can fix a few of them. If you can diagnose your hoverboard and tell what’s the issue, you might be able to repair it on your own. That can save you a whole lot of money, which is a great thing.
However, if you can’t figure out the problem, don’t push your luck with it. It might damage the device, and you don’t want that. Simply take it to a repair shop and get it fixed.
Hopefully, you find the information we provide helps in understanding what causes charging issues in hoverboards better.
